Please read Design Guide before upload a file:
1. The maximum size
Building size is max. 20x20x20 cm3. If you exceed the size, you can split the file into several parts and then build it together.
2. The minimum wall thickness
Wall thickness can provide allowable strength or flexibility of part. Models from ABS with a minimum wall thickness of 1mm can create a solid surface.
3. Surface Quality
Since the parts using additive manufacturing technology are built layer by layer, the lowest layer thickness determines the dimensional accuracy. In this manner minimum thickness of 0.1 mm. After making the piece layers are visible. If you need a high level of quality, our experts have the ability to polishing parts to be achieved glossy surface that will add to the final cost.
If your part have over hang levels -such as holes or surfaces with angles- machine uses structure to support it. After construction, the support of the pieces are separated. But it is possible that the separation remains on track. If you need a high level of quality, our experts have the ability to polishing parts to be achieved glossy surface that will add to the final cost.
Law ° 45
If you wouldn't like to have support in your model, you should make sure that the angle is less secure than 45°.
5-Embossed and carved details
Forr text engraved surface detail, our offer letters with a minimum thickness of 1mm and depth is 0.3mm. For text or highlight detail, our offer at least 2.5mm line thickness and a minimum height of 0.5 mm.
6. The polymer used in this method is a conventional ABS / PLA / HIPS .
1-On-text of e-mail write your name, contact number and city. Our experts after receiving the file will contact you within 24 hours.
2-STEP * file extension is acceptable to build. If the piece is designed to comply with the above, you can print ready file format also send STL *.
3. If your part includes the dimensional tolerances or surface quality, please mention this in the text message and also send drawing of dimensional tolerances.
4. Please choose the desired material and a specific color in mind and mention it. If your part has a specific application, mention it in your message text , so our experts recommend you suitable material for your application.